Like the PodTrak P4, the RodeCaster Pro also has 4 inputs and outputs, and the ability to integrate remote guests into your recording via Bluetooth or USB. If you’re stuck between the Zoom H4N Pro and P4, here’s a breakdown of the differences between the two. Here’s my full list of wins for the Zoom over the Tascam, followed by my list of features where the Tascam excels. Connect your P4 to your computer, phone, or tablet with a USB and then transfer the files you want over.

Product Drivers List | ZOOM Product Drivers List | ZOOM

Headphones For Everyone: With 4 independent headphone outputs, each with dedicated volume control, everyone can hear it all. Step 6: If you’ve recorded straight onto your SD card and want to transfer your files to a computer or your mobile device, head to FileTransfer on the Menu. What needs to be mentioned is that the Zoom H6 also can work with the EXH-6 Dual XLR/TRS Input Capsule, which allows you to have two XLR/TRS microphones. All you need to do is connect to your phone or computer and start recording with your remote guests. So if you currently use a USB mic, you’ll need to change over to a standard microphone to use the P4.This wasn’t an issue when recording my podcast with my usual co-host and a remote guest (as it also had a 1/8” jack input which recorded to channel 3-4) but when an in-person interview needed to happen, an adapter cable was required meaning that the audio from my co-host and I had to both be run into XLR channel one and in post-production, I lost the luxury of having each person’s mic on a separate track which in some scenarios can be a lifesaver. Since USB mics connect with a USB cable, you would clearly not be able to plug them into the PodTrak P4. The Zoom H6 and Podtrak P4, they might not have a huge difference on the outside – as they’re both portable and handy.

Zoom PodTrak P4 | Podcast Recorder - GAK - Guitars Zoom PodTrak P4 | Podcast Recorder - GAK - Guitars

And I plugged my phone into PodTrack via the phone input on the right side of the device using the TRRS cable I described earlier. However, if you are doing serious music recording like that, you’ll probably want a dedicated interface anyway. Just put in the P4 audio onto a track right under the Vixia’s own audio track, line them up, and delete or mute the Vixia audio. And channel 4 can be set to accept the audio from a Zoom (or Skype, or any online conference app) session.

But don’t forget that when you switch to input 4 to USB Mode the 4th XLR input is disabled and the USB input is enabled. But that is really only if you are doing lots of processing to lots of tracks as you might with a 24-track song with lots of effects and changing of the audio files. As there are only four buttons you need to choose wisely because you can not change the sounds programmed into the sound pad in the middle of a recording. If you prefer the pre-2020 version which has more accessories and capsules, it’s no doubt that the cost would be higher. Remember – the Podtrak P4 records in multi-track to the SD Card but does NOT record multi-track to your DAW.

Zoom Podtrak P4 Review - Podcast Hero ™ - High Converting Zoom Podtrak P4 Review - Podcast Hero ™ - High Converting

Besides, the Podtrak P4 provides a jack for Zoom’s BTA-2 wireless adapter and audio can be input through Bluetooth. It lets the audio get just up to maximum allowable (a bit before hitting 0dB), and then doesn’t allow the input level to get any louder.

If the co-host or guest downloads the relevant software app to their phone, they can use that and the sound quality should match that of the other person using the desktop version of the app. If you do have the BTA-2, connect it to the TRRS ports on the right side of the unit, then press and hold the button on the side of the BTA-2 until it flashes white. Everyone will be able to hear each other and it makes for such a flexible, high quality, and easy solution to recording remote interviews. When recording 2 people in the same room, in what ways will the P4 allow you to control the vocals from mic 1/track 1 from being heard in the playback of track 2.

Zoom P4 PodTrak - Podcasting Mixer and Interface

Note: If you are assigning intro or outro music that you will be fading out it is a good idea to lower the gain level in the sound pad setting so you have more room to fade out the music. The PodTrak P4 has a built-in mix-minus feature which means that you don’t need to worry about echo or feedback messing up your recording.It seems I’d be using the interface function of the P4 while livestreaming liiting me to only 2 inputs, correct? For example, the UMC 404HD audio interface has a toggle switch for phantom power but if turned on all four inputs have phantom power. In the P4 menu select ‘File Transfer’ and your computer will recognize the P4 as an external hard drive so you can easily transfer the files over to the directory of your choosing on your computer.