Additionally, this hard drive is compatible with Dell PowerEdge Servers and ships with hot-swap caddie for effortless installation. inch form factor is also more durable, making it better suited for use in desktop systems that are not subject to frequent movement. If you or your business need an enhanced storage solution for your server motherboards that is proven to be dependable, quality, and functional, the Dell SAS Hard drive W347K is the answer you're looking for.

This industry-leading enterprise drive reduces storage costs per GB while increasing capacity per watt. With the capability of communicating over larger distances, this allows you to transfer data efficiently.

Drives certified for use on Dell PERC controllers have special firmware loaded on them to tune the drives to the specific settings of the PERC controllers (HP, EMC,and NAS/SAN manufacturers do the same thing).

The best way to resolve would be to replace the generic with a certified drive to match the others, thenrepurpose the generic in a suitable environment (non-RAID in some casesor on a retail controller for which it is certified).

Failure rates are often lower on these devices since they have been far more thoroughly tested than new items. Compatibility: SAS and SATA drives are not interchangeable, as they use different connectors and protocols. SAS interface therefore are connectors that will connect server motherboard (system board) with the hard drives. Unprecedented performance with a 16 percent increase in sustained data rate over the last generation, up to 171 MB/sec.

warehouse facility has the equipment and experienced staff needed to meet the most rigorous IT hardware requirement.

SAS drives use a SAS interface and require a SAS controller, while SATA drives use a SATA interface and can be connected to a SATA controller or motherboard. HP / Compaq Proliant DL140 G2 , DL140 G3 , DL145 G2 , DL145 G3 , DL160 G5 , DL160 G5p , DL165 G5, DL180 G5,DL185 G5, DL320 G3 , DL320 G4 , DL320 G5 , DL320G5p, DL360 G4p , DL380 G5, ML110 G3 , ML150 G3 , ML150 G5 ,ML310 G2 ,ML310 G3 , ML310 G4 , ML310 G5 ,ML350 G4p , ML350 G5.

So if you will need to match a replacement PCB, it is important that you note the “ Board Number” of your current circuit board in addition to the hard drive’s “ Model Number“.The best way to fix this is to go 10Gbe of course but this means new cards on your servers, new switches and a host of further expenditure to go nowhere really fast(er). Bij het selecteren van een stuurprogramma-update dient u het stuurprogramma te kiezen dat bij uw besturingssysteem past.